(3) Plug all holes.
(1) Insert 90 degree short tool into holes A,B,
Only holes B and C are used on the M825
C, and D of the cargo bed and spray in all directions.
(2) Use the short rigid tool to sprayall surfaces
of the taillight openings. -
(1) Insert flexible tool into hole A of the upper
frame and hole B of the side frame, then spray slowly
(3) (M825 only). Insert 90 degree short tool in
while withdrawing the tool.
holes A and B and spray in all directions.
(2) Insert 90 degree short tool into holes C of
the lower frame and spray in all directions.
(4) Plug all holes.
Figure 4-12. Rustproofing Windshield Frame.
Figure 4-13. Rustproofing Cargo Body.