Figure 7-7. Rustproofing Cab Floor.
(1) Insert long rigid tool as far as it will go into
each of the windshield vertical frame channels A. It
may require two passes to ensure complete coverage.
(2) Lower windshield to a flat position to expose
holes D, then insert 90 degree short tool in each hole of
the horizontal frame channels and spray in all
directions. Repeat the same procedure for holes C.
(3) Plug all holes A and C. Leave holes B and D
f. Rustproofing Cowl, Hood and Dash Panel (see
(1) Use 45 degree tool to apply rustproofing
compound to the complete cowl exterior seam.
Completely coat the upper cowl panel and left- and
right-hand interior cowl side panels through the fresh
Figure 7-8. Rustproofing Windshield Frame.