TB 43-0213
CHAPTER 11
2 1/2-TON TRUCKS: FUEL TANKERS
Section I. DRILLING AND CLEANING PROCEDURES
a. General. Refer to paragraph 3-15 for general
drilling instructions,
NOTE
. Figure 11-1 provides a reference illustra-
one hole A in each bottom center support. The hole is
tion for the 2 1/2~Ton Fuel Tanker.
drilled 14 inches (35.6 cm) from the outer end of each
. Unless otherwise indicated, all holes
support.
should be sight drilled and should be
1/2 inch (1.3 cm) in diameter.
Figure 11-1. M49A2C Fuel Tanker.
11-1