13-5. Rustproofing Inspection.
Check the vehicle to ensure that all areas requiring
rustproofing compound have been properly and
a. Check seams, welds, corners, and boxed areas to
ensure that they are adequately coated.
b. Check wet film thickness with a wet film
of 10 roils is required. In areas where a wet film
thickness of 10 roils cannot be obtained or where
thickness cannot be measured, inspect for complete-
ness of coverage.
c. Check all drain holes to ensure that they are
Figure 13-8. Film Thickness Gage.
d. Check all inspection holes and drilled access
holes to ensure that compound coverage is adequate.
13-6. Component Installation.
e. Check vehicle to ensure that no compound has
Install cargo canvas and bows, if removed (see
been applied to prohibited areas (see CAUTION,