W-33 VEHICLE CABLE ASSEMBLY (cont.)
Most wires are shielded.
Ensure that the shielding is
stripped and only the center conductor is connected to
the solder cups and/or crimp terminal.
In truck cab, install five wires of W-33 cable to pin terminals of W33P2
according to bandmarkers. Solder five wires to proper pin terminals using
Connect W33P2 to J801 of remote radio control (C2298/VRC).
Remove and retain two bolts securing relay mounting bracket and diagnostic
Cut brown and white striped wire connected to relay on right using diagonal
Strip insulation from both ends of the brown and white stripped wire.
Splice both ends of the brown and white stripped wire to W33 FIELD CUR
RELAY wire with splices (item 89, M7928/5-4). Using crimping tool, crimp
Reinstall relay mounting bracket and diagnostic equipment connector under