COMPONENTS OF END ITEM
c. Part Number (P/N).
Indicates the primary
B-1. Scope. This appendix lists components of end
number used by the manufacturer, which controls the
item and basic issue items for the petroleum laboratory
design and characteristics of the item by means of its
to help inventory items required for safe and efficient
engineering drawings, specifications, standards, and
inspection requirements to identify an item or range of
B-2. General. Components of End Item List is divided
d. Description. Indicates the Federal item name
into the following sections.
and, if required, a minimum description to identify the
a. Section II, Components of the End Item.
These items, when assembled, comprise the Petroleum
e. Location. The physical location of each item
Laboratory and must accompany it whenever it is
listed is given in this column. The lists are designed to
transferred or turned in. Illustrations will help you identify
inventory all items in one area of the major item before
moving on to an adjacent area.
b. Section III, Basic Issue Items. A list of items
f. Usable on Code. Usable on Codes are not
which accompany the petroleum laboratory and are
required by the operator/crew for installation, operation,
g. Quantity Required (Qty Reqd). This column
lists the quantity of each item required for a complete
B-3. Explanation of Columns.
h. Quantity. This column is left blank for use
during inventory. Under the Rcv'd column, list the
a. Illustration. This column is divided as follows:
quantity actually received on major item. The Date
(1) Figure Number. Indicates the figure number
columns are for use when you inventory the major item
of the illustration on which the item is shown (if
at a later date such as for shipment to another site.
(2) Item Number. The number used to identify
i. Those Federal manufacturers codes and part
item called out in the illustration.
numbers suffixed with (*) are not issued with the
b. National Stock Number (NSN). Indicates the
laboratory, but are listed for Reference Purposes Only.
National Stock Number assigned to the item and which
will be used for requisition.
Change 1 B-1