(11) Rebuild. Consists of those services/actions
C-3. Explanation of Columns in Section III. '
necessary for the restoration of unserviceable equipment
to a like-new condition in accordance with original
a. Reference Code. This column consists of an
manufacturing standard Rebuild is the highest degree of
Arabic number listed in sequence from column (5) of
mater maintenance applied to Army equipment. '[ rebuild
Section II. The number references the special tools and
operation includes the act of returning zero those age
test equipment requirements.
measurements (hours/miles, e considered in classifying
b. Maintenance Level. This column shows the
lowest level of maintenance authorized to use the special
d. Maintenance Level, Column (4). This column is
tools or test equipment.
made up of subcolumns for each category maintenance.
Work time figures are listed in the subcolumns for the
c. Nomenclature. This column lists the name or
lowest level of maintenance authorized to perform the
identification of the tools or test equipment.
function listed in Column 3. These figures (shown
directly below symbol) indicate the average active time
d. National/NATO Stock Number. This column is
required to perform the maintenance function at the
provided for the NSN of special tools and test equipment
dicated category of maintenance under typical field
listed in the nomenclature column.
e. Tool Number. This column lists the manufacturer's
e. Tools and Equipment, Column (5). This column
code and part number of tools and test equipment.
is provided for references by code, the spec tools and
test equipment (Section III) required perform the
C-4. Explanation of Columns in Section IV.
maintenance functions (Section II).
a. Reference Code. This column consists of a letter
f. Remarks, Column (6). This column shall contain a
code in alphabetical order which is keyed to column 6 of
letter code in alphabetical order which shall be keyed to
the remarks contained in Section IV
b. Remarks. This column lists information pertinent
to the maintenance function being performed, as
indicated on the MAC, Section II.