TM 5-6640-212-14
Section IV. REMARKS
Reference
Remarks
Code
A
Refer to TM9-2330-271-14 for Maintenance.
B
Refer to TB9-6685-324-50 for Calibration.
C
Repair is restricted to the replacement of only those parts listed in the Integral components of End
Item List (ICOEIL). All other maintenance will be accomplished by returning the balance to the
manufacturer. Refer to TB 750-25 and TB9-5200-201-50 for calibration.
D
Refer to Chapter III, Section II for calibration of the Thermoregulator.
E
Refer to Chapter III, Section II for calibration of the Manometer.
F
Refer to Chapter III, Section I and II for calibration of the Pressure Recording Gage.
G
Repair is restricted to the replacement of those parts listed in the ICOEIL. All other maintenance will
be accomplished by returning the Refractometer to the manufacturer.
H
Operator will calibrate the Torsion Balance and the Meter Pack in accordance with the instructions in
TM5-6630-216-12.
I
Repair is restricted to the replacement of the Pans All other maintenance will be accomplished by
returning the balance to the manufacturer.
J
Repair is restricted to the replacement of the Glass Bezel. All other maintenance will be performed at
depot level.
K
Repair is restricted to the replacement of the Demineralizer Cartridges.
L
Repair is restricted to the replacement of the Rubber Door Gasket.
M
Analyzer will be calibrated in accordance with the instructions in Chapter III, Section II.
N
Multimeter will be calibrated in accordance with TB9-6625 -1250-50.
O
Weight Set must be calibrated in accordance with TB9-5200-201-50.
C-9/(C-10 blank)