CONNECTING TO TOWED VEHICLE - Continued
If the vehicle being recovered is not equipped with front towing eyes, skip steps
15 through 18.
If PLS System is being towed by M915, insure hitch pin (13) is in the fourth
hole from the top.
16. Install hitch pin (13) through upper tow bar assembly (14) and secure with spring clip (15).
17. Repeat step 13 for remaining tow bar assembly.
18. BOOM EXTEND to raise the lower tow bar assembly (14) until hitch pin (13) seats in lower towbar
assembly (15). Install second hitch pin (18) through both upper and lower tow bar assembly and secure
with spring clip (19) to bolts on lower section of tow bar assembly and tighten.
19. Repeat step 16 for remaining tow bar assembly.
Figure 50. Tow Bar Assembly