FIFTH WHEEL TOWING DEVICE
Clean area around lubrication points with dry
This Lubrication Chart is for operator/crew (C) and
Unit Maintenance (O). Lubrication intervals (on
equivalent before lubricating equipment. After
condition or hardtime) are based on normal
lubrication, wipe off excess lubricant to prevent
operation. Lubricate more during constant use and
accumulation of foreign matter.
less during inactive periods. Use correct grade of
lubricant for seasonal temperature expected.
Before you start your lubrication service:
For equipment under manufacturer 's warranty,
hardtime oil service intervals shall be followed.
Intervals shall be shortened if lubricants are known
a. Clean area around lubrication point before
to be contaminated or if operation is under adverse
conditions (e.g., longer than usual operating hours,
extended idling periods, extreme dust, etc).
a. Use wrong type/grade lubricant.
b. Use too much lubricant