GENERAL INFORMATION CONTINUED
QUALITY ASSURANCE (QA)
No particular quality assurance manual pertains specifically to the XT--1410--4 or XT--1410--5A Cross--Drive
Defective material received through the supply system should be reported on Quality Deficiency Report
(QDR) SF 368.
Instructions for preparing QDRs are provided in AR 702--7, Reporting of Quality Deficiency Data. QDRs
should be mailed directly to:
US Army Tank--Automotive and Armament Command
ATTN: AMSTA QTR
Warren, MI 48397--5000
A reply will be furnished directly to you.
COMMON TOOLS AND EQUIPMENT
For authorized common tools and equipment, refer to the Modified Table of Organization and Equipment (MTOE),
CTA 50--970; or CTA 8--100, as applicable to your unit.
The tool kit (box) assigned to the mechanic (on a 1--per mechanic--by--MOS basis) shall be identified in the individ-
ual maintenance paragraphs by nomenclature, item number, and work package. No tool in the kit shall be further
identified. Other tools required for performance of all tasks for the maintenance levels covered in the manual shall be
identified in the setup and shall be referenced to the Tool Identification List, WP 0088 00. Other tools includes tools
which are part of components of shop sets authorized to sections/teams; tools authorized by RPSTL and CTA
50--970; special and fabricated tools and items of TMDE.
SPECIAL TOOLS, TMDE, AND SUPPORT EQUIPMENT
Special tools and equipment listed and illustrated in TM 9--2350--215--34P are the only special tools and equipment
necessary to perform operations described in this manual. TM 9--2350--215--34P is the authority for requisitioning
special tools and equipment for supporting maintenance use. All special tools required in this technical manual are
listed in WP 0088 00 of this manual. Fabricated tools are identified in the initial setup; manufacturing instructions for
fabricated tools are found in WP 0089 00.
Repair parts are listed and illustrated in the repair parts and special tools list covering Direct Support and General
Support maintenance for this equipment (TM 9--2350--215--34P). All mandatory replacement parts identified in the
initial setup are listed in WP 0087 00 of this manual.
COPYRIGHT CREDIT LINE
Copyright E 1998 by United Defense, L.P. All rights reserved under the copyright laws.
This material may be reproduced for U.S. Government purposes only, pursuant to the
copyright license under the clause at (DFARS 52.227--7013) 1994.
END OF TASK