DIRECT SUPPORT, GENERAL SUPPORT, AND DEPOT
MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST
nance authorized to install the listed
item. The maintenance level codes
This manual is a list of repair parts and
special tools required for the performance of
Direct Support, General Support, and Depot
Direct Support Maintenance
General Support Maintenance
Recoverability Code, column 1C, indi-
This repair parts and special tools list is
cates whether unserviceable items
divided into the following sections:
should be returned for recovery or
salvage. items not coded are expend-
repair parts authorized for tile performance of
able. Recoverability code is:
maintenance at the direct support, general sup-
port, and depot level.
Items which are economically repairable
b. Special TO Ols, Test and Support Equip-
at direct and general support maintenance
activities and are normally furnished by
c. Federal Stock Number and Part Number
supply on an exchange basis.
Federal Stock Number, column 2, indi-
figure and item number.
cates the Federal stock number for the item.
c. Description, column 3,
3. Explanation of Columns.
Federal item name and a brief description of
The following provides an explanation of
the item. A five digit manufacturer's or other
service code and part number or Federal part
a. Source, Maintenance, and Recoverability
number will be included in parentheses within
Codes, column 1, is as follows:
the description column for reference. Repair
(1) Source Code, column 1A, indicates
parts quantities included in the assembly are
the selection status and source for the
shown in front of the part.
listed item. Source codes used are:
d. Unit of Issue, column 4, indicates the unit
used as a basis of issue, e.g. ea, sh, ft, etc.
e. Quantity Incorporated in Unit Pack, col-
Applied to repair parts authorized for
umn 5, indicates the actual quantity contained
f r o m local procurement, such repair
in the unit pack.
parts will be requisitioned through nor-
f. Quantity Incorporated in Unit, column 6,
mal supply channels with a supporting
indicates the quantity of repair parts in an as-
statement of nonavailability from local
sembly. The symbol = in this column indicates
that the raw material listed is used "as re-
Applied to repair parts which are not pro-
cured or stocked but are to be manufac-
tured at indicated maintenance categories.
g. 30-Day DS/GS Maintenance Allowances,
Applied to repair parts which are stocked
columns 7 and 8 are as follows:
i n or supplied from the GSA/DSA, or
Army supply system, and authorized for
The allowance columns are divided
use at indicated maintenance categories.
subcolumns. Indicated in each sub-
(2) M a i n t e n a n c e Code, column 1B, indi-
opposite the first appearance of each
cates the lowest category of mainte-
the total quantity of items authorized