MODEL 18 SPRAY GUN
1/10
The Spray Gun is exceptionally rugged in
construction, and is built to stand up under hard,
continuous use.
However, like any other fine
precision instrument, its most efficient operation
depends on a knowledge of its construction, operation,
and maintenance.
TYPES OF INSTALLATION
SIPHON FEED CUP HOOKUP
Air pressure for atomization is regulated at extractor.
Amount of, fluid is adjusted by fluid control screw on
gun, viscosity of paint, and air pressure.
PRESSURE FEED CUP HOOKUP
For fine finishing with limited spraying.
Air pressure for atomization is regulated at extractor,
fluid pressure at cup regulator. For heavy fluids and
internal mix nozzle spraying, fluid adjusted by control
screw on gun.
PRESSURE FEED TANK HOOKUP
Pressure cup also available less regulator
For portable painting operations.
(Double regulator)
Air pressure for atomization and fluid supply is regulated
by two individual air regulators on tank.
PRESSURE FEED TANK HOOKUP
For medium production spraying.
(Single regulator)
Air pressure for atomization is regulated at extractor,
fluid pressure at tank regulator.
PRESSURE FEED CIRCULATING HOOKUP
For heavy production spraying.
Air pressure atomization regulated at extractor. Fluid
pressure regulated at fluid regulator.
1