MWO 5-2330-360-23-1
8. MWO PARTS LIST (Continued)
b. Kit. Modification kit consists of one box of parts. Shipping weight and size is:
c.
Weight, lbs
Size, ft
Cube
150
3X2X2
12.00
c.
Bulk material
Nomenclature
NSN
Specification
Oil ........................................................................ 9150-00-189-6727 ............................... MIL-L-2104C
Tape, Antiseizing .................................................. 8030-00-889-3535 ............................... MIL-T-27730
Tag, Marker .......................................................... 9905-00-537-8954 ............................... MIL-T-12755
d. Removed parts disposition. Parts removed as a result of this MWO must be tagged and turned in to supply.
e.
9. SPECIAL TOOLS, JIGS, TEST MEASUREMENT AND DIAGNOSTIC EQUIPMENT (TMDE), AND FIXTURES
REQUIRED.
a.
Standard Tools.
(1) Drill motors: 1/4 and 1/2 inch chucks.
(2) Drill bits: 3/16, 3/8, 7/16.
(3) Tool Kit, General Mechanic.
(4) Shop Equipment, Automotive Maintenance and Repair: Organizational Maintenance No. 1.
b.
Special Tools.
None.
c.
Expendable Supplies and Materials supplied by the Unit.
Nomenclature
Part Number
NSN
Locknuts
MS 51922-9
PART I
10. MODIFICATION PROCEDURE FOR M870 BRAKE (BENDIX).
WARNING
To prevent injury to personnel or damage to equipment, Install jack stands under rear axles
before removing wheels.
a. Remove Rear Axle Outer and Inner Tire and Wheel Assemblies. Refer to TM 5-2330-360-14&P.
NOTE
Before starting to loosen ten lug nuts on wheels, check lug nut stampings to determine the
direction of rotation of nuts.
b. Remove Rear Deck Planks. Refer to TM 5-2330-360-14&P
4