MODIFICATION OF M1022A1 DOLLY SET POSITIONING TUBE REINFORCEMENT
PURPOSE
MWO KITS, PARTS AND THEIR DISPOSITION.
SPECIAL TOOLS; TOOL KITS; JIGS; TEST, MEASUREMENT, AND DIAGNOSTIC EQUIPMENT (TMDE); AND FIXTURES REQUIRED.
MODIFICATION PROCEDURE. - MWO-9-2330-390-25-10005
WEIGHT AND BALANCE DATA. - MWO-9-2330-390-25-10006
QUALITY ASSURANCE REQUIREMENTS.
RECORDING AND REPORTING OF THE MODIFICATION. - MWO-9-2330-390-25-10008
MODIFICATION IDENTIFICATION. - MWO-9-2330-390-25-10009
STABILITY CABLE MOUNT (PRE-INSTALLED) - MWO-9-2330-390-25-10010
Figure 1B
TRANSPORT MODE - MWO-9-2330-390-25-10012
MANEUVERING POSITION - MWO-9-2330-390-25-10013
WOODEN BLOCK PLACED UNDER DRAWBAR - MWO-9-2330-390-25-10014
M1022A1 SUPPORT FRAME
BOTTOM BEAM - MWO-9-2330-390-25-10016
STABILITY CABLE MOUNT
Figure 8 - MWO-9-2330-390-25-10018
UNCOUPLING INSTRUCTIONS - MWO-9-2330-390-25-10019
APPENDIX A. LOWERING DOLLY SET WITH OR WITHOUT SHELTER AND DETACHING FRONT AND REAR DOLLIES. - MWO-9-2330-390-25-10020
APPENDIX A. LOWERING DOLLY SET WITH OR WITHOUT SHELTER AND DETACHING FRONT AND REAR DOLLIES-continued - MWO-9-2330-390-25-10021
APPENDIX A. LOWERING DOLLY SET WITH OR WITHOUT SHELTER AND DETACHING FRONT AND REAR DOLLIES-continued - MWO-9-2330-390-25-10022
APPENDIX A. LOWERING DOLLY SET WITH OR WITHOUT SHELTER AND DETACHING FRONT AND REAR DOLLIES-continued - MWO-9-2330-390-25-10023
APPENDIX A. LOWERING DOLLY SET WITH OR WITHOUT SHELTER AND DETACHING FRONT AND REAR DOLLIES-continued - MWO-9-2330-390-25-10024
APPENDIX A. LOWERING DOLLY SET WITH OR WITHOUT SHELTER AND DETACHING FRONT AND REAR DOLLIES-continued - MWO-9-2330-390-25-10025
APPENDIX A. LOWERING DOLLY SET WITH OR WITHOUT SHELTER AND DETACHING FRONT AND REAR DOLLIES-continued - MWO-9-2330-390-25-10026
APPENDIX A. LOWERING DOLLY SET WITH OR WITHOUT SHELTER AND DETACHING FRONT AND REAR DOLLIES-continued - MWO-9-2330-390-25-10027
APPENDIX B. MANEUVERING POSITION - MWO-9-2330-390-25-10028
Placing Dolly Half in Maneuvering Position-continued
Removing Dolly Half From Maneuvering Position. - MWO-9-2330-390-25-10030
APPENDIX C. TOP AND BOTTOM BEAM AND HYDRAULIC LIFT CYLINDER REMOVAL / INSTALLATION - MWO-9-2330-390-25-10031
REMOVAL-continued - MWO-9-2330-390-25-10032
REMOVAL-continued - MWO-9-2330-390-25-10033
REMOVAL-continued - MWO-9-2330-390-25-10034
INSTALLATION - MWO-9-2330-390-25-10035
INSTALLATION-continued - MWO-9-2330-390-25-10036
INSTALLATION-continued - MWO-9-2330-390-25-10037
INSTALLATION-continued - MWO-9-2330-390-25-10038
Follow-on Tasks - MWO-9-2330-390-25-10039
APPENDIX D: HYDRAULIC SYSTEM BLEEDING - MWO-9-2330-390-25-10040
BLEEDING-continued - MWO-9-2330-390-25-10041
BLEEDING-continued - MWO-9-2330-390-25-10042
MWO-9-2330-390-25-1 Modification of M1022A1 Dolly Set Positioning Tube Reinforcement Manual
PURPOSE
MWO KITS, PARTS AND THEIR DISPOSITION.
SPECIAL TOOLS; TOOL KITS; JIGS; TEST, MEASUREMENT, AND DIAGNOSTIC EQUIPMENT (TMDE); AND FIXTURES REQUIRED.
MODIFICATION PROCEDURE. - MWO-9-2330-390-25-10005
WEIGHT AND BALANCE DATA. - MWO-9-2330-390-25-10006
QUALITY ASSURANCE REQUIREMENTS.
RECORDING AND REPORTING OF THE MODIFICATION. - MWO-9-2330-390-25-10008
MODIFICATION IDENTIFICATION. - MWO-9-2330-390-25-10009
STABILITY CABLE MOUNT (PRE-INSTALLED) - MWO-9-2330-390-25-10010
Figure 1B
TRANSPORT MODE - MWO-9-2330-390-25-10012
MANEUVERING POSITION - MWO-9-2330-390-25-10013
WOODEN BLOCK PLACED UNDER DRAWBAR - MWO-9-2330-390-25-10014
M1022A1 SUPPORT FRAME
BOTTOM BEAM - MWO-9-2330-390-25-10016
STABILITY CABLE MOUNT
Figure 8 - MWO-9-2330-390-25-10018
UNCOUPLING INSTRUCTIONS - MWO-9-2330-390-25-10019
APPENDIX A. LOWERING DOLLY SET WITH OR WITHOUT SHELTER AND DETACHING FRONT AND REAR DOLLIES. - MWO-9-2330-390-25-10020
APPENDIX A. LOWERING DOLLY SET WITH OR WITHOUT SHELTER AND DETACHING FRONT AND REAR DOLLIES-continued - MWO-9-2330-390-25-10021
APPENDIX A. LOWERING DOLLY SET WITH OR WITHOUT SHELTER AND DETACHING FRONT AND REAR DOLLIES-continued - MWO-9-2330-390-25-10022
APPENDIX A. LOWERING DOLLY SET WITH OR WITHOUT SHELTER AND DETACHING FRONT AND REAR DOLLIES-continued - MWO-9-2330-390-25-10023
APPENDIX A. LOWERING DOLLY SET WITH OR WITHOUT SHELTER AND DETACHING FRONT AND REAR DOLLIES-continued - MWO-9-2330-390-25-10024
APPENDIX A. LOWERING DOLLY SET WITH OR WITHOUT SHELTER AND DETACHING FRONT AND REAR DOLLIES-continued - MWO-9-2330-390-25-10025
APPENDIX A. LOWERING DOLLY SET WITH OR WITHOUT SHELTER AND DETACHING FRONT AND REAR DOLLIES-continued - MWO-9-2330-390-25-10026
APPENDIX A. LOWERING DOLLY SET WITH OR WITHOUT SHELTER AND DETACHING FRONT AND REAR DOLLIES-continued - MWO-9-2330-390-25-10027
APPENDIX B. MANEUVERING POSITION - MWO-9-2330-390-25-10028
Placing Dolly Half in Maneuvering Position-continued
Removing Dolly Half From Maneuvering Position. - MWO-9-2330-390-25-10030
APPENDIX C. TOP AND BOTTOM BEAM AND HYDRAULIC LIFT CYLINDER REMOVAL / INSTALLATION - MWO-9-2330-390-25-10031
REMOVAL-continued - MWO-9-2330-390-25-10032
REMOVAL-continued - MWO-9-2330-390-25-10033
REMOVAL-continued - MWO-9-2330-390-25-10034
INSTALLATION - MWO-9-2330-390-25-10035
INSTALLATION-continued - MWO-9-2330-390-25-10036
INSTALLATION-continued - MWO-9-2330-390-25-10037
INSTALLATION-continued - MWO-9-2330-390-25-10038
Follow-on Tasks - MWO-9-2330-390-25-10039
APPENDIX D: HYDRAULIC SYSTEM BLEEDING - MWO-9-2330-390-25-10040
BLEEDING-continued - MWO-9-2330-390-25-10041
BLEEDING-continued - MWO-9-2330-390-25-10042
MWO-9-2330-390-25-1 Modification of M1022A1 Dolly Set Positioning Tube Reinforcement Manual
