MWO 9 -2330-390-35-1
12. WEIGHT AND BALANCE DATA.
a. Additional weight (452.2 lbs).
ITEM
NOMENCLATURE
PART NO.
WEIGHT
QTY.
(lbs)
19
Mount - Lower Front
001025-1-008
8.18
2
20
Mount - Lower Rear (L)
001025-1-013(L)
7.70
1
21
Mount - Lower Rear (R)
001025-1-013(R)
7.70
1
22
Bolt 7 x UNC, Hex
91257A738
0.52
4
23
Bushing Steel, Shoulder
001025-1-016
0.25
8
24
Nut UNC, Locking
92501A437
0.03
4
25
Shim Cylinder
001025-1-007
1.24
4
26
Bolt UNC, Flat Head
91253A536
0.02
12
27
Assembly-Cable Lanyard
001025-1-907
1.50
4
28
Mount - Upper
001025-1-003
8.29
4
29
Pin 1 x 7, Clevis
11-339-01
1.70
4
30
Pin Cotter, Hairpin
98335A094
0.05
4
31
Spacer 1.0 in. ID
92510A371
0.14
4
32
Mount - Stability Cable
001025-1-009
1.06
4
33
Tube Lower Vertical
001025-1-103
40.12
4
34
Tube Upper Vertical (L)
001025-1-104(L)
49.65
2
35
Tube Upper Vertical (R)
001025-1-104(R)
49.65
2
b. Weight Removed (320.9 lbs).
ITEM
NOMENCLATURE
PART NO.
WEIGHT (lbs)
QTY.
-
Lower Vertical Tube
36.47
4
-
Upper Vertical Tube
42.00
4
13
Pin Straight, Headed
8D00060-2
1.07
4
14
Washer Flat, 1 in.
AN960-1616
0.40
4
15
Pin - Cotter
MS24665-495
0.01
4
16
Pin - Cotter
MS24665-351
0.01
4
17
Washer Flat, in.
MS51412-8
0.03
4
18
Pin Straight, Headed
8D00060-3
0.23
4
c. Net Weight Increase (131.3 lbs).
13. QUALITY ASSURANCE REQUIREMENTS.
a. General. The following information is furnished to ensure the proper application
of this MWO and provide clarification in regard to the adequacy of installer's
inspection methods and procedures applicable to Quality Assurance (QA).
Inspection shall be IAW TM 9-2330-390-14&P, and MWO.
9
