TM 43-0139
(3)
Place the first character on a flat surface with the translucent application tape side down and carefully
remove the protective liner. Avoid handling the adhesive on the character.
(4)
Position the character to the guideline on the materiel. Press one edge down while holding the rest of the
character taut and slightly away from the surface.
(5)
Roll the character down firmly with a roller or applicator to remove any trapped air bubbles or wrinkles. Do
not remove application tape at this time.
Figure 6-6. Applying Adhesive Vinyl Markers (Decals)
6-11
