TM 9--2520--215--34
TRANSMISSION OIL FILTERS REPLACEMENT -- CONTINUED
0034 00
INSTALLATION
WARNING
1. Clean 12 screws (1) and 12 transmission screw holes (7) with dry--cleaning solvent.
2. Install two new filter elements (6) in transmission (5). On --5A transmission, lubricate right side filters preformed
packings with lubricant (item 15, WP 0085 00) prior to installation of filter.
3. Apply lubricant (item 6, WP 0085 00) to threads of 12 screws.
4. Install new gasket (4) and transmission filter head (3) on transmission (5) with 12 screws (1) and 12 new
lockwashers (2). Torque 12 screws to 25--31 ft--lb in accordance with torque sequence diagram.
WARNING
Oil sprayed from improperly installed oil filter head assembly can cause fire in engine
compartment.
5. Verify torque to specific limit on each of 12 screws (1). If any screws (1) move during recheck, repeat torque
process.
1
7
11
12
8
4
2
6
10
9
5
3
1
2
3
1
2
3
4
4
6
6
6
6
5
FILTERS
WITHOUT
PREFORMED
PACKINGS
FILTERS
WITH
PREFORMED
PACKINGS
(---5A TRANSMISSION)
TORQUE SEQUENCE
DIAGRAM
7
7
NOTE
FOLLOW--ON MAINTENANCE:
Install transmission filter switch,
(TM 9--2350--292--20 or TM 9--2350--256
--20), if removed
Install transmission breather tube
(WP 0026 00), if removed
Install transmission in vehicle (TM
9--2350--292--20 or TM 9--2350--256--20)
END OF TASK
0034 00--3/4 blank
