TM 9--2520--215--34
0072 00--2
LOW--RANGE CLUTCH ANCHOR AND RELATED PARTS REPAIR –
CONTINUED
0072 00
DISASSEMBLY – Continued
3. Turn the low--range clutch anchor assembly (1) over and lift off low and reverse--range clutch backplate (4).
NOTE
Do not remove 60 snap rings from pins unless replacement is necessary.
4. Remove 30 long clutch release pins (5), 30 springs (6) and 30 short pins (7). Remove 60 snap rings (8). Discard
snap rings.
CLEANING
See WP 0018 00 for cleaning procedures.
INSPECTION
See WP 0018 00 for general inspection and repair recommendations.
FIT AND WEAR LIMITS
Check the following parts to the dimensions listed. Replace if not within the specified dimensions.
PART NAME
CHECK POINTS
ACCEPTABLE LIMITS
Low--and reverse--range clutch piston release
spring
Length of spring
Length under load
3.035 in.
1.58 in. at 28.8 to 35.2 lb
