CONVERTER WILL NOT GO INTO LOCKUP IN HIGH OR INTERMEDIATE RANGES

EXCESSIVE OIL TEMPERATURE (ABOVE 285 DEGREES F) (cont) - TM-9-2520-215-34_63

CONVERTER GOES INTO OR OUT OF LOCKUP AT IMPROPER SPEEDS

TM-9-2520-215-34 Recovery Vehicle Full Tracked: Heavy M88A2 (NSN 2350 01 290 4683) Manual
Page Navigation
52

TM 9--2520--215--34 CONVERTER WILL NOT GO INTO LOCKUP IN HIGH OR INTERMEDIATE RANGES 0011 00 THIS WORK PACKAGE COVERS: Converter Will Not Go Into Lockup in High or Intermediate Ranges INITIAL SETUP: Tools and Special Tools General mechanic’s tool kit, (item 1, WP 0088 00) Equipment Conditions Vehicle MASTER switch OFF (TM 9--2350--256--10 or TM 9--2350--292--10) Personnel Required Two WARNING Remove rings, bracelets, wristwatches, and neck chains before working on any vehicle. Jewelry can catch on equip- ment and cause injury, or may short across an electrical circuit and cause severe burns or electrical shock. Is converter lockup timer valve moving freely? Check for sticking converter lockup timer valve. no yes Remove timer, clean or replace faulty valve (WP 0060 00). Check for sticking converter lockup relay valve. A B Remove relay, clean or replace faulty valves (WP 0060 00). END OF TASK 0011 00--1/2 blank

Privacy Statement
Press Release
Contact