TM 9-4910-458-35P
TM
9-4910-458-12
Operator and Organiza-
for the number of equipment supported. Sub-
tional Maintenance
sequent appearances of the same item will have
Manual (Including Re-
no entry in the allowance column, but have
pair Parts and Special
a reference in the description column, to the
Tool Lists).
first appearance of the item. Items authorized
b. How to Requisition a Part Identified only
for use as required but not for initial stockage
by a Manufacturer's Part Number.
are identified with an asterisk (*) in the al-
When requisitioning a C source (local pro-
lowance columns.
curement) item identified only by a manu-
(2) The quantitative allowances for DS/
facturer's part number, it is mandatory that
GS levels of maintenance will represent initial
the following information be furnished the
stockage for a 30-day period for the number of
supply officer:
equipments supported.
(1) Manufacturer's code number or other
h. 1 - Year Allowances Per 100 Equipments/
service's code number (5 digit number
Contingency Planning Purposes, column 9,
shown in parentheses) following the
indicates opposite the first appearance of each
manufacturer's or other service's part
item the total quantity required for distribution
number (2) below.
and contingency planning purposes. The range
(2) Manufacturer's or other service's part
of items indicate total quantities of all author-
number (the number and sometimes
ized items required to provide for adequate
letters, shown before the manufactur-
support of 100 equipments for one year. Items
er's or other service's code number
not authorized for- distribution and contingency
(1) above). Dashes, commas, or other
planning purposes are identified with an aster-
marks must be included exactly as
isk (*) in the allowance columns.
listed.
i. Depot Maintenance Allowances Per 100
(3) Nomenclature exactly as listed herein,
Equipment, column 10, indicates opposite the
including dimensions if necessary.
first appearance of each item, the total quantity
(4) Name of manufacturer of end item
authorized for depot maintenance of 100 equip-
(from cover of TM or manufacturer's
ments. Subsequent appearances of the same
name plate).
item will have no entry in this column, but
(5) Federal stock number of end item
have a reference in the description column, to
(from TM).
the first appearance, of the item. Items author-
(6) Manufacturer's model number (from
ized for use but not for initial stockage are
TM or name/data plate, preferably
identified with an asterisk (*) in the allowance
name/data plate).
column.
(7) Manufacturer's serial number (from
j. Illustration, column 11, is divided as
name/data plate).
follows :
(8) Any other information such as type,
frame number, and electrical charac-
(1) Figure number, column 11A, indicates
teristic, if applicable.
the figure number of the illustration
(9) If DD Form 1348 is used, fill in all
in which the item is shown.
blocks except 4, 5, 6, and Remarks
(2) Item of Symbol Number, column 11B,
field, in accordance with AR 725-
indicates the callout number used to
50. Complete form as follows:
reference the item in the illustration.
(a) In blocks 4, 5, and 6, list manu-
facturer's or other service's code
4. Special Information.
and part number (as listed in de-
a. Related Publication.
scription column).
(b) In Remarks field, list noun name
The following publication pertains to auto-
(repair part), end item appli-
motive generator; alternator, and starter test
cation (FSN of end item), manu-
stand and its components:
3
