TM 5-3655-210-12
4-61. Engine Shutter and Control Rod
(1) Disconnect the control cable from behind the
shutter control (9, fig. 4-68) by loosening the setscrew
Repair and replacement procedures are similar to
securing the cable in position.
those given in the instructions above for the rear door
shutter and control rod.
machine screws (8) securing the control assembly (9) to
4-62. Refrigeration Shutter Control
the bracket (7). Remove the control.
a. Control Removal.
TS 024595
1. Expansion valve adjusting screw
11.
Relief valve for carbon dioxide, storage
2. Expansion valve
12.
Relief valve for carbon dioxide, storage
3. Low pressure gage line valve, conversion
13.
Safety vent switching valve, storage
4. Low pressure gage line valve, storage
14.
Safety relief valve, transfer pump
5. Bleeder valve for carbon dioxide, conversion
15.
High pressure gage line valve, conversion
6. Bleeder valve for carbon dioxide, storage
16.
High pressure gage line valve, storage '
7. Shutter control mounting bracket
17.
Relief valve for carbon dioxide, conversion
8. Machine screw
18.
Safety vent switching valve, conversion
9. Shutter control
19.
Relief valve for carbon dioxide, conversion
10. Capscrew
Figure 4-68. Power compartment valves and controls.
4-74