TRANSPORT CONFIGURATION - Continued
DO NOT over extend mast. This could cause damage to mast supports.
11. Install two clevises on mast and secure with clevis pins and spring pins.
12. Using remote control box or valve control levers, MAST EXTEND (19) to line up
arrows (20 and 21).
Figure 29. Pin Alignment Items
13. Install two 3/8 inch safety chains (11) as shown.
14. Using remote control box or hydraulic valve control levers, MAST RETRACT
until safety chains (11) are tight.
Figure 30. Chain Tightening Items
END OF WORK PACKAGE