MWO 5-2330-360-23-1
10. INSTALLATION PROCEDURE M870A1 BRAKE MOD (BENDIX) (Continued).
Refer to Figure 22.
c. Install mounting brackets, PN 112472.
NOTE
If minor misallnement of new mounting bracket holes and frame holes occur, make
adjustments by elongation of mounting bracket holes. Do not alter frame holes.
(1) Install two new mounting brackets (1), in the new holes on the inside of the main frame rails (2), with short side
of brackets next to frame.
(2) Secure new mounting brackets (1) to main frame rails (2) using screws (3), PN 290964, flat washers (4), PN
204235, lockwashers (5), PN 202983, and locknuts (6), PN 298476.
Figure 22.
24
