TB 43-0213
CHAPTER 7
2 1/2-TON AND 5-TON TRUCKS: CABS (TYPICAL)
Section I. PRELIMINARY PROCEDURES
7-1
Component Removal.
q
typical 2 1/2 and 5-Ton cabs.
b. Due to the wide variety of special applications for
2 1/2- and 5-Ton vehicles, only the cabs will be discussed
in this chapter. Typical variations of these trucks will be
covered in succeeding chapters.
NOTE
Removal instructions for 2 1/2 Ton Series
Trucks are in TM 9-2320-209-20 and
TM 9-2320-209-34.
Removal instructions for 5-Ton Series
Trucks are in TM 9-2320-211-20 and
TM 9-2320-211-34.
Prior to rustproofing, the following components
must be removed to provide access:
(1) Raise windows to a fully closed position,
(2) Remove the following components:
(a) Cab canvas.
(b) Side door panels.
(c) Seats.
(d) Center tunnel.
(e) Access cover to master cylinder.
TA504846
Figure 7-1. Typical 2 1/2 Ton and
5-Ton Trucks.
7-1
