TM 5-3655-210-12
Figure 1-1. Conversion storage and charging unit, left front view.
1-7.
Tabulated Data
cylinder, ground rod assembly and electrolyte are all
enclosed in this compartment.
e. The chassis and housing completely support
a. Identification. The conversion storage and charging
and cover the storage tank, power compartment, and
unit has four major identification plates. The information
storage, compartment. External clearance lights are
contained on the plates is listed below:
provided on the housing for use during road
(1) Engine plate.
transportation. Internal dome lights are provided in the
power and storage compartments. The chassis is fitted
with air brakes that operate in conjunction with the
Manufacturer............................. Wisconsin Motor Corp.
tractor towing the unit. Manually operated, two speed
Model ..................................................................MTHD
landing jacks are provided to support the front end of
Size (bore; stroke) ............................................ 3 x 3/, 4
the unit. Removable lifting eye covers permits access
(8.255 x 8.256 cm)
to the lifting eye holes at the top of the tank body. The
Specification No ................................................ 147203
four tie-down rings are to be installed in the lifting eye
Serial No .................................................... as assigned
holes when using a crane to lift the unit.
Additional .................................... Operating instructions
1-2
