TM 5-3655-210-12
4-22. Testing Of Radio Interference Suppression
with chassis ground of the trailer when tested with a low
Components
voltage ohmmeter. If interference is suspected, replace
suppression components by trial-and-error method until
The suppression components used on the equipment
trouble. Is corrected.
are not rated in measurable values by which failure can
be determined. All shielding should indicate continuity
8.
Heater base
1.
Nut
9.
IE toothed lockwasher
2.
Machine screw
10.
Capscrew
3.
Shielded ignition cable
11.
Housing
4.
Clip
12.
IE toothed lock washer #10
5.
Combustion head
6.
Shielded spark plug
13.
Ignition unit
7.
Nut
14.
Radio interference suppressor
Figure 4-23. Ignition suppression components (sheet 2 of 2).
4-28
