TM 5-3655-210-12
c. Column (S), Nomenclature. This column lists
listed in Column 3. These figures indicate the average
active time required to perform the maintenance
the name or identification of the common tool sets,
function at the indicated category of maintenance under
special tools or test equipment.
d. Column (4), National/Nato Stock No. (NSN).
typical field operating conditions.
e. Column (5), Tools and Equipment. This
This column is provided for the NSN of common tool
column is provided for referencing by code, the common
sets, special tools and test equipment listed in the
tool sets (not individual tools) special tools, test and
nomenclature column.
e. Column (5), Tool Number. This column lists the
support equipment required to perform the designated
function.
manufacturer code and part number of tools and test
equipment.
B-3.
Explanation Of Columns In Section III
B-4.
Explanation Of Columns In Section IV
a. Column (1), Reference Code. This column
a. Reference Code. This column consists of the
consists of an arabic number listed in sequence from
Column 5 of Section II. The number references the
maintenance functions as described in paragraph B-2,
common tool sets, special tools and test equipment
step c.
requirements.
b. Column (2), Maintenance Category.
b. Remarks.
This
This column lists information
column shows the lowest category of maintenance
pertinent to the maintenance function to be performed.
authorized to use the special tools or test equipment.
B-2
