TM 9-2510-247-13&P
0012 00
WINCHING OPERATIONS - Continued
3. Place damper on center point of cable. Adjust to center of cable periodically during the
winching operation.
4.
Pull winch free spool lever (1) to allow payout of winch cable and remove winch cable
chains (4) from stowage position.
Figure 52. Winch Free Spool Lever
5.
Using double hook (2) and pulley block (3), thread winch cable chains (4) back to front D-rings
(5). Reel excess cable onto winch spool.
6.
Remove wheel chocks. Disengage brakes on towed vehicle. Using remote control or valve
control levers, pull towed vehicle onto towing device. BOOM RETRACT to allow clearance
between boom and towed vehicle. If required, continue winching operation until towed vehicle is
positioned to connect to towing bars on boom.
7.
Continue towed vehicle connection. Refer to WP 0010.
END OF WORK PACKAGE
Figure 53. Winch During Use
0012 00-2
