TM 9-2510-247-13&P
KINGPIN PLACEMENT
NOTE
The main frame may be lowered using MAST EXTEND to ease kingpin placement. After
placement, return mainframe to the highest position using MAST RETRACT.
REMOVAL
1. Remove spring pin (1) from top of kingpin (2).
2. Using kingpin wrench (3), align tabs on wrench (3) with slots on kingpin nut (4).
3. Remove kingpin nut (4) and grommet (5).
4. Rotate kingpin (2) to disengage safety (6) and lower kingpin from main frame.
5. If changing location of kingpin, remove wing nut (7) and wooden plug (8).
Figure 73. Kingpin Placement
0034 00-1
