TM 9-2510-247-13&P
0058 00
REMOVAL - Continued
NOTE
There are two safety valves. Both valves are removed the same way.
Maintenance personnel must note the position of all parts prior to
removal to ease the installation process.
The upper safety valve controls the mast functions and the lower safety
valve controls the boom functions.
1.
Remove hydraulic hoses from tee fitting (1).
2.
Remove hydraulic hose from elbow (2).
3.
Remove hydraulic hoses from bottom of safety valve (3).
4.
Remove 1 1/2 inch (38.1 mm) screw (4) from safety valve (3) and bracket (5).
5.
Remove 2 1/2 inch (63.5) screw (6) from safety valve (3) and bracket (5).
6.
Remove safety valve (3) from bracket (5).
7.
Remove tee fitting (1) from globe valve (7).
8.
Remove globe valve (7) from straight adapter (8).
9.
Remove straight adapter (8) from safety valve (3).
10. Remove elbow (2) from check valve (9).
11. Remove check valve (9) from safety valve (3).
Figure 106. Hydraulic Safety Valve Assembly
0058 00-2
