TM 9--2520--215--34
COOLER BYPASS, LUBRICATION AND CONVERTER PRESSURE
REGULATOR VALVE ASSEMBLY REPLACEMENT
0032 00
THIS WORK PACKAGE COVERS:
Removal, Installation
INITIAL SETUP:
Tools and Special Tools
General mechanics tool kit (item 1, WP 0088 00)
Materials/Parts
Lockwasher (7) (item 17, WP 0087 00)
Gasket (item 18, WP 0087 00)
Equipment Conditions
Main control valve assembly removed (WP 0028 00)
NOTE
The XT--1410--5A transmission requires seven lockwashers to secure the cooler bypass
lubrication and condenser regulator valve body.
REMOVAL
Remove five bolts (1), bolt (2), bolt (3), seven lockwashers (4), if installed, cooler bypass lubrication and condenser
pressure regulator valve body (5), and gasket (6). Discard gasket and lockwashers.
INSTALLATION
Install cooler bypass lubrication and condenser pressure regulator valve body (5) and new gasket (6) with five bolts
(1), bolt (2), bolt (3), and seven new lockwashers (4), if removed.
3
5
6
1
4
2
NOTE
FOLLOW--ON MAINTENANCE:
Install main control valve assembly
(WP 0028 00)
END OF TASK
0032 00--1/2 blank
