TM 9--2520--215--34
STEER OIL PRESSURE REGULATOR VALVE BODY ASSEMBLY
REPLACEMENT
0030 00
THIS WORK PACKAGE COVERS:
Removal, Installation
INITIAL SETUP:
Tools and Special Tools
General mechanic’s tool kit (item 1, WP 0088 00)
Materials/Parts
Self--locking bolt (item 35, WP 0087 00)
Self--locking bolt (7) (item 39, WP 0087 00)
Materials/Parts – Continued
Gasket (item 13, WP 0087 00)
Gasket (item 38, WP 0087 00)
Equipment Conditions
Main control valve assembly removed (WP 0028 00)
REMOVAL
1. Remove self--locking bolt (1), bolt (2), plate (3) and gasket (4). Discard self--locking bolt and gasket.
2. Remove seven self--locking bolts (5), steer oil pressure regulator valve body assembly (6) and gasket (7).
Discard self--locking bolts and gasket.
INSTALLATION
1. Install steer oil pressure regulator valve body assembly (6) with new gasket (7) and seven new self--locking bolts
(5).
2. Install plate (3) with new gasket (4), bolt (2) and new self--locking bolt (1).
1
2
3
4
6
7
5
NOTE
FOLLOW--ON MAINTENANCE:
Install main control valve assembly
(WP 0028 00)
END OF TASK
0030 00--1/2 blank
