TM 9--2520--215--34
0001 00--3
GENERAL INFORMATION CONTINUED
0001 00
WARRANTY INFORMATION
No particular warranty specifically pertains to the XT--1410--4 or XT--1410--5A cross drive Transmissions.
NOMENCLATURE CROSS--REFERENCE LIST
Nomenclature in this manual was chosen in accordance with the terms used for provisioning as they appear
in the Repair Parts and Special Tools List (RPSTL) and Maintenance Allocation Chart (MAC) TM 9--2350--256--20 or
TM 9--2350--292--20. A few tools and components are, however, referred to by names more common than those in
the RPSTL. In many cases the more shorter name for the same component.
OFFICIAL PROVISIONING NOMENCLATURE
MORE COMMON NAME
Gauge rod
Dipstick, Bayonet gauge
Safety wire
Lockwire
Socket head screw key
Hex key
LIST OF ABBREVIATIONS
KPA
Kilopascals
PSI
Pounds Per Square Inch
AEPS
Army Electronic Product Support
MWO
Modification Work Order
EIR
Equipment Improvement Report
EIR/MS
Equipment Improvement Report And Maintenance Summary
EIR/MD
Equipment Improvement Report And Maintenance Digest
TAMMS
The Army Maintenance Management Systems
CPC
Corrosion, Prevention And Control
HRV
Heavy Recovery Vehicle
MAC
Maintenance Allocation Chart
RPSTL
Repair Parts And Special Tools List
QDRs
Quality Deficiency Report
MTOE
Modified Table Of Organization And Equipment
CTA
Certified Table Of Allowances
APPROX
Approximate
GAL
Gallon
RPM
Revolutions Per Minute
LB -- FT
Pound--Feet
FT
Foot/Feet
LB -- IN
Pounds--Inches
BORE O.D.
Bore Outer Diameter
BORE I.D.
Bore Inner Diameter
MIN
Minimum
UNC
Unified Coarse
UNF
Unified Fine
