TM 9--2520--215--34
RANGE SELECTOR LINKAGE ADJUSTMENT
0051 00
THIS WORK PACKAGE COVERS:
Adjustment
INITIAL SETUP:
Tools and Special Tools
General mechanic’s tool kit (item 1, WP 0088 00)
Equipment Conditions
Vehicle parked and blocked (TM 9--2350--256--10 or
TM 9--2350--292--10)
RANGE SELECTOR LINKAGE ADJUSTMENT
1. With range selector linkage disconnected at control valve body assembly, position vehicle range selector control in
reverse range position.
2. Position shift position indicator on control valve in reverse--range (R) position.
3. Adjust range selector linkage until aligned with lever on control valve body assembly so that connecting clevis pin
can be installed freely.
4. Check position of vehicle selector control in all ranges and neutral against position of shift indicator on control
valve. All positions should coincide.
END OF TASK
0051 00--1/2 blank
