TM 9--2520--215--34
0052 00--1
BRAKE LINKAGE, BRAKE AND BRAKE AIR VALVE LINKAGE ADJUSTMENT
0052 00
THIS WORK PACKAGE COVERS:
Adjustment
INITIAL SETUP:
Tools and Special Tools
General mechanics tool kit (item 1, WP 0088 00)
Equipment Conditions
Vehicle parked and blocked (TM 9--2350--256--10 or
TM 9--2350--292--10)
BRAKE LINKAGE ADJUSTMENT
1. Disconnect vehicle brake linkage from brake apply lever on output reduction gear assemblies. Adjust brake apply
levers by positioning them toward the rear of transmission fully against their stops. Adjustment is made with a
socket wrench while pushing wrench against collar surrounding adjusting head to unlock it. Do not rotate
adjustment after brake apply lever contacts stop.
2. Position brake control in fully released position. Adjust vehicle linkage until aligned with brake apply levers. Insert
connecting pins and lock them.