TM 9--2520--215--34
0074 00--10
LOW-- AND REVERSE--RANGE PLANETARIES AND RELATED PARTS
REPAIR – CONTINUED
0074 00
FIT AND WEAR LIMITS
Check the following parts to the dimensions listed. Replace if not within the specified dimensions.
PART NAME
CHECK POINTS
ACCEPTABLE LIMITS
Internal splined clutch plate
External splined clutch plate
Ball bearing
Internal splined clutch plate
External splined clutch plate
Low--reverse--range clutch piston release
spring
Low range planetary carrier assembly
Low--range planetary
Pinion thrust washer
Spindle roller
Low--range planetary pinion
Thickness of plate
Thickness of plate
Bearing ID
Bearing fit on carrier
Bearing OD
Bearing fit on gear
Thickness of plate
Thickness of plate
Free length of spring
Length under load
Carrier ID of splined end
Bearing fit in carrier
Carrier OD at bearing surface
Bearing fit on carrier
Carrier ID at gear end
Bearing fit in carrier and retainer
Spindle OD at middle
Thickness of washer
Roller OD
Pinion ID
0.1580 to 0.1630 in.
Wear limit: 0.1380 in.
0.1580 to 0.1630 in.
Wear limit: 0.1380 in.
4.3299 to 4.3307 in.
0.0014T to 0.0001L
6.6919 to 6.6929 in.
0.0002T to 0.0020L
0.1580 to 01630 in.
Wear limit: 0.1380 in.
0.1580 to 0.1630 in.
Wear limit: 0.1380 in.
3.035 in.
1.58 at 28.8 to 35.2 lb
To 2.9997 in.
Wear limit: 3.0000 in.
0.0010T to 0.0003L
3.5432 to 3.5439 in.
Wear limit: 3.5428 in.
0.0014T to 0.0001L
4.9211 to 4.9221 in.
Wear limit: 4.9924 in.
0.0002T to 0.0018L
1.5127 to 1.5132 in.
Wear limit: 1.5117 in.
0.0590 to 0.620 in.
Wear limit: 0.0550 in
0.2498 to 2500 in.
Wear limit: 0.2493 in.
2.0137 to 2.0142 in
Wear limit: 2.0152 in.
