TM 9--2520--215--34
0074 00--14
LOW-- AND REVERSE--RANGE PLANETARIES AND RELATED PARTS
REPAIR – CONTINUED
0074 00
ASSEMBLY – Continued
5. Remove steel tube. Position spindle (26) so that lock ball pocket is near upper--end of spindle (26) and directly
above lock ball pocket.
6. Press spindle (26) into bore in reverse--range planetary carrier (25) installing lock ball (27) when spindle pocket in
the spindle is near carrier. Press spindle (26) flush with carrier (25).
7. Repeat steps 2 through 6, above, for installation of seven spindle and pinion assemblies.
8. Stake reverse--range planetary carrier (25) against spindle (26) ends. Eight to ten points approximately 1/16 inch
outside spindle bore circumference or peen approximately 30 percent of spindle bore circumference against end
of spindles.
