TM 9-4910-663-34
CHAPTER 1
INTRODUCTION
Section I. GENERAL
1-1. SCOPE. This manual is for your use in performing direct support and general support maintenance of Automotive
Generator, Alternator, Starter Test Stand, Model GASR-500, Part Numbers 7458-2 and 7458-4, hereinafter referred to as
the test stand. Unless otherwise stated, the instructions in this manual apply to both test stands.
1-2. MAINTENANCE FORMS AND RECORDS. Maintenance forms and records which you are required to use are
listed and explained in DA PAM 738-750.
1-3. CALIBRATION. Calibration of all test stand meters shall be performed in accordance with TB 9-4910-527-50,
Calibration Procedure for Generator and Starter Test Stand, United Manufacturing Models 7336, 7458 and Sun Electric
Model AGT-9.
1-4. QUALITY ASSURANCE/QUALITY CONTROL (QA/QC). No requirement for pertinent QA/AC instructions.
1-5. REPORTING QUALITY DEFICIENCIES: QDRs will be prepared using Standard Form 368, Quality Deficiency
Report. Instructions for preparing QDRs are provided in DA PAM 738-750, The Army Maintenance Management system.
QDRs should be mailed directly to: Commander, U.S. Army Armament, Munitions and Chemical Command, ATTN:
AMSMC-QAD, Rock Island, IL 61299-6000. A reply will be furnished directly to you.
Section II. DESCRIPTION AND TABULAR DATA
1-6. DESCRIPTION. Refer to paragraph 1-7, TM 9-4910-663-12.
1-7. DATA PLATES. Refer to paragraph 1-8, TM 9-4910-663-12.
1-8. TABULATED DATA. Refer to paragraph 1-9, TM 9-4910-663-12.
1-9. REPAIR PARTS, SPECIAL TOOLS, TMDE AND SUPPORT EQUIPMENT
a.
Special Tools and Equipment. No special tools and equipment are required.
b.
Spares and Repair Parts. Spares and repair parts are listed and illustrated in TM 9-4910-663-24P, the Repair
Parts and Special Tool list covering direct support and general support for this equipment.
Change 1 1-1/(1-2 blank)
