MWO 9-2330-392-20-1
24
39
38
35
40
Figure 7
19. Insert inner slide (35) into housing (24), positioning the inner slide so the side slot
is aligned with the master pin hole in the cast housing. (figure 7)
20. Install master pin P/N 12479777 (38) through cast housing, ensuring it passes
through both rollers and rear damper eye. (figure 7)
21. Install flat washer P/N W221NAAW087NN039NNBA1 (39) and new supplied
cotter pin P/N MS24665-421 (40) to secure the master pin. (figure 7)
44
43
44
42
41
Figure 8
10
