TB 43-0213
c. Check all drain holes to ensure that they are
open.
d. Check all inspection holes and drilled access
holes to ensure that compound coverage is adequate.
e. Check vehicle to ensure that no compound has
been applied to prohibited areas (see CAUTION,
TA504901
Figure 14-17. Rustproofing Tailgate Wings.
14-5. Rustproofing Inspection.
Check the vehicle to ensure that all areas requiring
rustproofing compound have been properly and
completely coated.
a. Check seams, welds, corners, and boxed areas to
TA504789
ensure that they are adequately coated.
Figure 14-18. Film Thickness Gage
b. Check wet film thickness with a wet film
thickness gage (see Figure 14-18). A wet film thickness
14-6. Component Installation.
of 10 mils is required. In areas where a wet film
thickness of 10 mils cannot be obtained or where
thickness cannot be measured, inspect for complete-
Install handles to top of tailgate (see TM 9-2320-
ness of coverage.
211-20).
14-9/(14-10 Blank)
