TB 5-2520-551-24
REMOTE RADIO CONTROL MOUNTING BRACKET
In truck cab, remove and retain four bolts and one screw securing dashboard
56.
Remove
cover using 9/32" nut driver and NO.2 cross tip screwdriver.
dashboard cover. Refer to TM 9-2320-289-34.
Using 3/8" combination wrench, remove and retain nut securing instrument
57.
panel molding to dashboard cover.
Measure 6-5/8" left of center post on molding. Cut molding using saber
58.
saw.
Measure 2" right from right side edge of left hole and mark a vertical
59.
Measure 1-1/2" right from the vertical line, and mark another
line.
vertical line. Measure 2-3/4" down from upper edge where molding is
attached to dashboard cover and mark a horizontal line.
Cut a new opening
where marked using saber saw.
60.
Reinstall instrument panel molding onto dashboard cover. Secure molding
with a nut. Using a 3/8" combination wrench, tighten nut.
19
