TB 5-2520-551-24
TEST AND ADJUSTMENT
SPEED CONTROL RPM ADJUSTMENT
1. Ensure that all electrical connections are tight, and that all hardware
attachments are secure.
2. Place cable on front battery negative (-) terminal, tighten nut, and place
protective cover over terminal.
Place cable on rear battery negative (-) terminal, tighten nut, and place
3
protective cover over terminal.
4. Place gear shift lever in PARK (P) and set EMERGENCY BRAKE.
5. Start vehicle engine and allow to idle.
6. Move speed control toggle switch to RUN.
7. Move speed control toggle switch to START and hold. Engine speed should not
increase.
8. Move speed control toggle switch to OFF.
56
