TB 5-2520-551-24
HYDRAULIC LINES (cont.)
197. Position protective sleeve (item 56, C5131118-3) over generator pump high
pressure line (item 108, C511101O-1). Slide sleeve up hose until top of
sleeve is positioned just below channel bracket (item 6, C5110651-1). Trim
sleeve as necessary.
Using 1/4" flat tip screwdriver, tighten hose clamp
(item 60, AN737TW58) securing protective sleeve (item 56, C5131118-3).
198. Connect generator pump high pressure line (item 108, C511101O-1) onto union
(item 113, AN815-12D) and tighten using 1-1/4" combination wrench while
holding union (item 113, AN815-12D) connected to generator pump high
pressure flex hose (item 99, C5122512-1) using 12" adjustable wrench.
199. Position protective sleeve (item 55, C5131118-2) over A/C pump suction hose
(M6000HO0304).
Slide sleeve up hose until top of sleeve is positioned just
below channel bracket (item 6, C5110651-1). Trim sleeve as necessary.
Using 1/4" flat tip screwdriver, tighten hose clamp (item 59, AN737TW30)
securing protective sleeve (item 55, C5131118-2).
200. Slide hose clamp (item 112, AN737TW46) onto A/C pump suction hose
(M6000HO0304).
Push hose onto union of tandem pump (C5122498-1). Using
1/4" flat tip screwdriver, tighten hose clamp (item 112, AN737TW46).
201. Position protective sleeve (item 55, C5131118-2) over generator pump
suction hose (M6000DO0307). Slide sleeve up hose until top of sleeve is
positioned just below channel bracket (item 6, C5110651-1). Trim sleeve as
Using 1/4" flat tip screwdriver, tighten hose clamp (item 59,
necessary.
AN737TW30) securing protective sleeve (item 70, C5131118-2).
202. Slide hose clamp (item 59, AN737TW30) onto generator pump suction hose
Push hose onto union of tandem pump (C5122498-1). Using
(M6000DO0307).
1/4" flat tip screwdriver, tighten hose clamp (item 59, AN737TW30).
203. In truck bed, connect union to A/C sense line (item 110, C5111012-1).
Tighten union (item 114, AN815-4D) using 12" adjustable wrench while
holding A/C sense line (item 110, C5111012-1) using 9/16" combination
wrench.
204. Connect A/C sense flex hose (item 95, C5122508-1) onto union (item 114,
AN815-4D) and tighten using 9/16" combination wrench. Hold union (item
114, AN815-4D) using 12" adjustable wrench.
205. Position protective sleeve (item 54, C5131118-1) over A/C sense line flex
hose (item 95, C5122508-1). Slide sleeve down flex hose (item 95,
C5122508-1). Using 9/16" combination wrench, hold A/C sense flex hose
(item 95, C5122508-1). Using 12" adjustable wrench, tighten quick
disconnect (item 101, C5131409-1) to flex hose (item 95, C5122508-1). Trim
sleeve as necessary, and secure with tiedown strap (item 73, MS3367-2-0).
52
