TB 5-2520-551-24
HYDRAULIC RESERVOIR ASSEMBLY (cont.)
177. Feed tandem pump case drain tube through clearance plate in bed of truck
and connect to union on reservoir (C5122481-1). Using 7/8" combination
wrench, tighten tandem pump case drain tube (item 106, C5111OO8-1) while
using 12" adjustable wrench to hold union on reservoir (C5122481-1).
of truck, and connect to reservoir (C5122481-1). Using 1 1/4" combination
while using 12" adjustable wrench to hold union on reservoir (C5122481-1).
179. Connect HG/AC case drain line (item 111, C5111013-1) to reservoir
(item 111, C5111013-1) while using 12" adjustable wrench to hold elbow on
reservoir (C5122481-1).
180. Connect HG/AC return line (item 97, C512251O-1) to reservoir (C5122481-1).
C512251O-1) while using 15" adjustable wrench to hold elbow on reservoir
(C5122481-1).
181. Position a 24" piece of insulation sleeving (item 92, M23053/5-108-0) over
W-33 cable where wire connections are to be made to reservoir. Connect
(C5122481-1).
Observe tags for proper installation (blue to white, red to
red, and yellow to green).
Crimp splice fasteners (item 89, M7928/5-4)
using crimping pliers.
49