Figure 2-5. Floor Plate Dimensions and Locations

TB-9-2350-368-25 Fabrication and Operation of Powerplant Test Stand Manual
Page Navigation
10

TB 9-2350-368-25

11. Cut floor plates (1 through 7) to dimensions shown in Figure 2-5. Tack weld in place as indicated in

Figure 2-4. (Items 13 through 17 on Bill of Materials list). Hard weld, if all items are in proper

alignment, in accordance with welding specification QQ-A-250.

12. Drill four holes in plate (2) for mounting the 100 amp regulator, using voltage regulator/200 amp

regulator face plate (1, Figure 2-12).

13. Test stand base may now be placed on axles and wheels or a skid according to facility requirements.

Figure 2-5. Floor Plate Dimensions and Locations

2-6