TM 9-2510-247-13&P
0007 00
TRANSPORT CONFIGURATION - Continued
WARNING
DO NOT operate boom until mast is in track. Failure to comply could cause
serious injury or death to personnel or damage to equipment.
7. Main frame fifth wheel area should be clear of obstructions.
8. Insert pivot pins (17) into aligned holes (15 and 16).
17
15
16
Figure 27. Pin Alignment and Valve
9. Using remote control box or valve control levers, MAST RETRACT (18) to fold mast onto
main frame.
NOTE
Hydraulic pressure gauge should read 300-800 psi. If adjustment is needed,
refer to WP 0003.
18
18
Figure 28. Hydraulic Controls
10. Remove pivot pins (17).
0007 00-4
