TM 9-2510-247-13&P
TRANSPORT CONFIGURATION
The transport configuration will be used to move the fifth wheel towing device when not loaded. This
task assumes the fifth wheel towing device is coupled to a prime mover and transport legs are engaged.
WARNING
Ensure hydraulic protection valve is open (breather switch inline with breather)
prior to operating hydraulics. Failure to comply could cause injury to personnel
or damage to equipment.
Never walk under Booms during any operations. Failure to comply may cause
injury or death to personnel.
CAUTION
Never transport a towed vehicle with the transport legs in the down position.
Failure to comply could cause damage to equipment.
NOTE
The hydraulic pressure release valve is open when the valve control handle is
in line with the breather valve.
1. Set 12-24 volt junction box (1) to proper voltage.
2. Remove electrical control box cover (2) from electrical control box (3) and switch electric
toggle (4) to ON position.
2
1
3
4
7
Figure 23. Electric Control Boxes
0007 00-1
