TM 9-2510-247-13&P
0027 00
UNIT TROUBLESHOOTING - Continued
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
ELECTRICAL SYSTEM - Continued
Step 4.
Are both strobe lights inoperable?
If no, go to step 5.
If yes, check electrical ground (WP 0088).
Step 5.
Is there minimum12VDC on batteries?
If no, go to step 6.
If yes, go to step 7.
Step 6.
Is NATO slave cable connected?
If no, install NATO cable in receptacle on prime mover and receptacle on 12/24
volt junction box.
If yes, go to step 7.
Step 7.
Is wiring from electrical control box damaged, kinked, or frayed?
If no, replace strobe light assembly (WP 0049).
If yes, replace wiring (WP 0051).
END OF WORK PACKAGE
0027 00-6
