TM 9-2510-247-13&P
0047 00
Composite Taillight Removal
1. Remove four screws (9) and lockwashers (10) from composite taillight bracket (2). Discard lockwashers.
2. Pull four wires (7) from hole (8) until four connectors (6) are showing.
NOTE
Tag and mark wires before disconnecting.
3. Disconnect four wires (7).
4. Push wires (7) back through connectors (6) and remove four C washers (5).
5. Remove two screws (3), lockwashers (4), and composite taillight (1) from composite taillight
bracket (2). Discard lockwashers.
3
8
4
2
2
1
7
5
6
10
9
Figure 86. Composite Taillight Assembly
0047 00-4
